Sensor

SCPI Commands :

[SOURce<HW>]:POWer:SERVoing:SENSor:APERture
[SOURce<HW>]:POWer:SERVoing:SENSor

class SensorCls[source]

Sensor commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_aperture() → float[source]

# SCPI: [SOURce<HW>]:POWer:SERVoing:SENSor:APERture
value: float = driver.source.power.servoing.sensor.get_aperture()

Sets the aperture time (size of the acquisition interval) of the power sensor during power servoing.

return:

aperture: float Range: 10e-6 to 100e-3

get_value() → PowSensWithUndef[source]

# SCPI: [SOURce<HW>]:POWer:SERVoing:SENSor
value: enums.PowSensWithUndef = driver.source.power.servoing.sensor.get_value()

Sets the power sensor as mapped with the remote command SLISt:ELEMent<ch>:MAPPing.

return:

sensor: SENS1| SENS2| SENSor2| SENS3| SENSor3| SENS4| SENSor4| SENSor1| UNDefined

set_aperture(aperture: float) → None[source]

# SCPI: [SOURce<HW>]:POWer:SERVoing:SENSor:APERture
driver.source.power.servoing.sensor.set_aperture(aperture = 1.0)

Sets the aperture time (size of the acquisition interval) of the power sensor during power servoing.

param aperture:

float Range: 10e-6 to 100e-3

set_value(sensor: PowSensWithUndef) → None[source]

# SCPI: [SOURce<HW>]:POWer:SERVoing:SENSor
driver.source.power.servoing.sensor.set_value(sensor = enums.PowSensWithUndef.SENS1)

Sets the power sensor as mapped with the remote command SLISt:ELEMent<ch>:MAPPing.

param sensor:

SENS1| SENS2| SENSor2| SENS3| SENSor3| SENS4| SENSor4| SENSor1| UNDefined