State
SCPI Commands :
OUTPut<HW>:[STATe]:PON
OUTPut<HW>:[STATe]
- class StateCls[source]
State commands group definition. 2 total commands, 0 Subgroups, 2 group commands
- get_pon() PowOutpPonMode [source]
# SCPI: OUTPut<HW>:[STATe]:PON value: enums.PowOutpPonMode = driver.output.state.get_pon()
Selects the state of the RF output when the instrument is switched on.
- return:
pon: OFF| UNCHanged OFF Deactivates the output when the instrument is switched on ([RF off]) . UNCHanged Restores the initial state of the RF output before the last turn off.
- get_value() bool [source]
# SCPI: OUTPut<HW>:[STATe] value: bool = driver.output.state.get_value()
Activates the RF output signal ([RF on/off]) .
- return:
state: 1| ON| 0| OFF
- set_pon(pon: PowOutpPonMode) None [source]
# SCPI: OUTPut<HW>:[STATe]:PON driver.output.state.set_pon(pon = enums.PowOutpPonMode.OFF)
Selects the state of the RF output when the instrument is switched on.
- param pon:
OFF| UNCHanged OFF Deactivates the output when the instrument is switched on ([RF off]) . UNCHanged Restores the initial state of the RF output before the last turn off.
- set_value(state: bool) None [source]
# SCPI: OUTPut<HW>:[STATe] driver.output.state.set_value(state = False)
Activates the RF output signal ([RF on/off]) .
- param state:
1| ON| 0| OFF